Chemistry 2011.org
Chemistry2011.org
All About Chemistry... 2011 and beyond

Related Stories

Big Box Stores Could Ditch the Grid, Use Natural Gas Fuel Cells Instead

Released: 4-Mar-2015 4:30 PM EST
Source Newsroom: Pacific Northwest National Laboratory
Contact Information

Available for logged-in reporters only

Citations Fuel Cells

Mar. 6, 2015 - RICHLAND, Wash. – Large facilities like big box stores or hospitals could keep the lights on by using a Fuel-Cell'>fuel cell that runs off the natural gas that already flows in pipelines below most city streets.

Instead of drawing electricity from the power grid, facilities could use natural gas-powered solid oxide fuel cells to lower their electric costs, increase power reliability, reduce greenhouse gas emissions, and maybe even offset costs by selling excess Fuel-Cell'>fuel cell-generated power back to the power grid. Such an energy future could be possible -- assuming Fuel-Cell'>fuel cell lifespans are improved and enough systems are produced to reach economies of scale -- according to a cost-benefit analysis published in the journal Fuel Cells.

If such advances are made, researchers at the Department of Energy's Pacific Northwest National Laboratory conclude natural gas solid oxide fuel cells could play a significant role in meeting future energy demand. The technology could help meet the 10 percent increase in electricity the nation will need in the next decade. That estimate, by the U.S. Energy Information Administration, will require 68 gigawatts more generating capacity.

PNNL's study focused on distributed generation, where fuel cells are located right at the individual facilities they power. This is different than the traditional central generation approach to energy, where large power plants are often located far away from end users.

Instead of burning fuel like combustion engines, solid oxide fuel cells oxidize it electrochemically. Each cell is made of ceramic materials, which form three layers - an anode, a cathode and a solid electrolyte, much like a battery. Multiple cells must be assembled into a Fuel-Cell'>fuel cell stack to achieve the desired power output.

Solid oxide fuel cells are inherently highly efficient in converting fossil fuels to electrical energy and PNNL's unique system design, which includes anode recycling, steam reforming, and pressurization, advances the technology even further.

"On the anode side of the Fuel-Cell'>fuel cell, we recycle waste heat in a steam reformer to squeeze even more energy out of the fuel - about 25 percent more chemical energy compared to typical solid oxide fuel systems," said Larry Chick a materials engineer at PNNL. "The stack operates under high pressure - about the equivalent of being 230 feet under water. That increases the power density, which reduces the size of the stack by about 60 percent and lowers the Fuel-Cell'>fuel cell's overall cost significantly."

The researchers based their cost modeling study on a small-scale solid oxide Fuel-Cell'>fuel cell system designed, built, and tested at PNNL and a larger, conceptual system of 270 kilowatts, which is enough to power a large retail facility or light industry. Cost estimates are expressed in 2012 dollars.

The study showed that for the same power output, a natural gas solid oxide Fuel-Cell'>fuel cell would cost almost one-third less to build than a centralized natural gas combined cycle plant.

"We were intentionally conservative as we calculated the cost of both building and operating natural gas solid oxide fuel cells and other types of generation," said PNNL economist Mark Weimar. "For instance, in comparing the solid oxide Fuel-Cell'>fuel cell to a 400 megawatt natural gas combined cycle plant, we assumed that the larger, central generation plant would pay cheaper wholesale prices for natural gas compared to smaller, distributed generation fuel cells, which we estimated would pay retail or almost double the wholesale cost."

The authors report that if stack life improvements are made and mass manufacturing is achieved, natural gas solid oxide fuel cells can be cost-competitive with natural gas combined cycle plants, which are projected to generate electricity at a total cost of 6.5 cents per KWh. They calculated natural gas fuel cells would have a total electricity cost of 8.2 cents per kWh.

When researchers factored in the additional benefits of distributed generation, it brought the cost down to 5.3 cents per kWh. Those benefits stem from the fact that fuel cells don't have the extra costs and power losses associated with transmission and distribution power lines that central power plants experience.

Higher efficiency, lower emissions

The high efficiency of natural gas fuel cells means fewer greenhouse gas emissions as well. The PNNL prototype showed 56 percent electrical conversion efficiency compared to 32 percent from conventional coal plants and 53 percent from natural gas combined cycle plants. The study shows that the natural gas Fuel-Cell'>fuel cell system would produce 15 percent less carbon dioxide per kWh than a modern natural gas combined cycle power plant.

Additionally, since a distributed generation natural gas Fuel-Cell'>fuel cell system would be installed on site, some of the heat from the Fuel-Cell'>fuel cell could be used to heat water or interior spaces. If just 20 percent of the Fuel-Cell'>fuel cell heat replaced the use of grid electricity for heating, then the Fuel-Cell'>fuel cell system would produce 22 percent less carbon dioxide than large-scale natural gas combined cycle plants tied to the grid.

Currently, Fuel-Cell'>fuel cell stacks last only about two years. Over time, as the fuel and oxygen are constantly being pumped in and run over the catalyst in the cells, the chemicals start to degrade and the system starts to wear down. The study noted Fuel-Cell'>fuel cell stacks would need to last six to eight years to be competitive, and uses a15-year lifespan in the study's cost comparison table.

With additional research, the limited stack life can be overcome," Chick said. "It's a matter of conducting reliability testing on integrated systems and using advanced characterization techniques to figure out what is degrading the performance of the stacks over time. The Department of Energy's Solid Oxide Fuel-Cell'>Fuel Cell program has been achieving targeted improvements over the last decade, so things are moving in the right direction."

Reference: Chick, L., Weimar, M., Whyatt, G. and Powell, M. (2015), The Case for Natural Gas Fueled Solid Oxide Fuel-Cell'>Fuel Cell Power Systems for Distributed Generation. Fuel Cells, 15: 49-60. DOI: 10.1002/fuce.201400103

Interdisciplinary teams at Pacific Northwest National Laboratory address many of America's most pressing issues in energy, the environment and national security through advances in basic and applied science. Founded in 1965, PNNL employs 4,300 staff and has an annual budget of more than $1 billion. It is managed by Battelle for the U.S. Department of Energy's Office of Science. As the single largest supporter of basic research in the physical sciences in the United States, the Office of Science is working to address some of the most pressing challenges of our time. For more information on PNNL, visit the PNNL News Center, or follow PNNL on Facebook, Google+, LinkedIn and Twitter.


Comment/Share


Share this story with your friends!

Social Networking

Please recommend us on Facebook, Twitter and more:

Other social media tools

Global Partners
Feedback

Tell us what you think of Chemistry 2011 -- we welcome both positive and negative comments. Have any problems using the site? Questions?

About us

Chemistry2011 is an informational resource for students, educators and the self-taught in the field of chemistry. We offer resources such as course materials, chemistry department listings, activities, events, projects and more along with current news releases.

Events & Activities

Are you interested in listing an event or sharing an activity or idea? Perhaps you are coordinating an event and are in need of additional resources? Within our site you will find a variety of activities and projects your peers have previously submitted or which have been freely shared through creative commons licenses. Here are some highlights: Featured Idea 1, Featured Idea 2.

About you

Ready to get involved? The first step is to sign up by following the link: Join Here. Also don’t forget to fill out your profile including any professional designations.

Global Partners